- Tests Available
- Crease Testing
- Box Forming
- Spring Back Force
- Friction Testing
- Results and Analysis
- Crease Performance
- Trend Analysis
- Supplier Performance
- Software Setup
- Technical Specs
- FAQ
Technical Specifications
Instrument Specification
| Size | 100cm wide * 27cm high * 42 cm deep |
Supply Voltage |
100-240v, 47-63hz, 1.35A, Single Phase |
Power Consumption |
Less than 500 watts |
Test Range |
0o -100o user selectable |
Torque Range |
0 to 3.0 NM displayed to 3 decimal places |
Fold Rate |
Approximately 0o -90o in 8 seconds |
Accuracy |
± 0.002 Nm |
Output |
Ethernet – Crossover Cable Supplied |
Co-efficient of Friction |
When friction tester is fitted, it is displayed as the tangent of the angle at which slip occurs, shown to 3 decimal places. Accuracy ±1o of the angle of slip |
Maximum Carton Width |
Standard 59cms. Non standard 85cms |
Maximum Carton Thickness |
Standard 5mm |
Weight |
26.5 kg |
EMC Tested to Standards |
BS EN 55022:2006, EN 61000-3-2,3:1995, BS EN55024:1998, |
Software Specification
| System Requirements | Standard Software Supplied PC with Windows XP or Vista |
||
|
MS Excel |
|
|
|
Ethernet Connection |
||
|
|
||
Optional Extras
- Friction Tester
- Press to cut out standard 120*50mm and 70*40mm friction test samples
Proctor & Gamble and Unilever have used the Newton Carton Tester for many years..
.
Many of their suppliers have also used the Newton Carton Tester to ensure that their cartons meet the specifications set.
Newton Industrial Group Ltd.
Newton House
Carham Road
Hoylake
CH47 4FF
Fax: +44(0)151 632 6580
Email: info@newtongroup.co.uk